- Lonseal 650 Epoxy Adhesive is formulated for high performance installation of Lonseal flooring on horizontal surfaces such as floors
- Wet set adhesive
- Approximately coverage – gallon: 170-225 square feet
- Open Time (the time between the two-part epoxy being mixed until placing the flooring material into the adhesive) is up to 15 minutes
- Working Time (the time for the adhesive to accept the flooring material after being applied to the substrate) is up to 15 minutes
Note: This adhesive must be applied by a trowel with 1/16″ x 1/32″ x 1/32″ U-Notches. Trowel sizes is listed by width/depth/space. All information provided above will vary depending on the job site conditions, including temperature, humidity, substrate porosity, and applicator.