Description
The 120 volt AC side it can be configured for either 30 amp service and uses standard residential circuit breakers. When used with dual-leg (240-volt) power, the WF-8930/50NP has spaces for two 50 amp (or 30 amp) main breakers and up to 12 branch circuit breakers (when using tandem breakers). When used with single-leg (120-volt) power, there is space for one 50 amp (or 30 amp) main breaker and up to 6 branch circuits (when using tandem breakers). For a list of factory-tested and approved breakers can be found in the manual. You can also find breakers we’ve used in this Google Sheet of products we recommend but don’t sell (yet)!
The 12 volt DC side supports up to 15 circuits (fuses). Each of the circuits has a small red LED light that indicates a blown fuse.
Outer Dimensions: 13 3/4″ wide x 9 1/2″ tall x 4″ deep
Rough Opening: 12 3/16″ wide x 8 3/16″ tall x 3″ deep
Weight: 3.75 pounds
Important: This panel is not ignition-protected, and should not be installed in a compartment with batteries or any LP gas.
Other Features of the WFCO WF-8930 Electric Panel
- Built-in standard protection for over-current, over-temperature, over-voltage, reverse polarity
- Two-piece, includes door with window
- Built-in terminal bars for negative DC wiring
- Built-in strain reliefs in cabinet back (suitable for 10/2-14/2 Romex)
- Rear-mounted AC 15A or 20A receptacle, allowing easy converter plug-in for power
- UL and cUL listed
- Limited 2-year warranty.
