An air-filled leveling cushion that lifts your van tire up to 7 inches for precise campsite leveling.

**Sold Individually - not as a set**

The Flat-Jack is a heavy-duty inflatable air jack that sits under your tire and raises it when inflated. Instead of stacking plastic leveling blocks, you simply drive onto the Flat-Jack and pump it up to the exact height you need.

It’s compact when deflated, incredibly strong when inflated, and designed specifically for RVs and camper vans.

Why They Are Better Than Leveling Blocks

Leveling blocks are bulky, awkward to stack, and often crack under the weight of heavier rigs. They also force you to “guess” your height and reposition multiple times.

The Flat-Jack solves all of that.

Fine-tuned leveling – Inflate gradually and stop exactly where you want (up to 7”).
Compact storage – Deflates flat and weighs just 2.2 lbs.
Heavy-duty strength – Supports up to 3,307 lbs per wheel.
Fast setup – Drive on. Inflate. Done.

If you care about sleeping flat, cooking comfortably, or keeping an absorption refrigerator happy, precise leveling makes a real difference.

Also Great for Vehicle Storage

If you store your van on concrete, Flat-Jacks can be used under the tires to help prevent flat-spotting and tire deformation.

How It Works

Place the Flat-Jack in front of your tire (aligned with the yellow tread marks).
Slowly roll your tire onto it.
Inflate using any pump or compressor with a standard Schrader valve.
Stop inflating when you reach your desired height.

No stacking. No backing up repeatedly. No cracked plastic.

Flat-Jack 2.0 Specs

Raises tires up to 7 inches
Supports 3,307 lbs per wheel
Fits tires up to 12” wide
26.6” diameter
2.2 lbs each

Not compatible with dual rear wheels (dually setups).

Vanlife Outfitters Exclusive

We work directly with the manufacturer in Germany and are the exclusive North American seller of Flat-Jacks. There is a two-year manufacturer defects warranty.

But Why Is It So Expensive?

Flat-Jacks are manufactured in small batches in Germany using a durable Rhino-liner–like material. They cost more than plastic blocks — but they’re built to last for years, take up far less space, and are dramatically easier to use.

If you’ve invested heavily in your van and value comfort, reliability, and efficiency at camp, this is a leveling solution designed to match that investment.

Important Use Notes

Orientation matters – Only use the Flat-Jack with the wheel supported on the long side (follow the “yellow tread marks” printed on the Flat-Jack). Never inflate the Flat-Jack if it’s perpendicular to the wheel.
Do not exceed 22 PSI. We recommend stopping at 15–18 PSI to allow for temperature and pressure fluctuations. As a rule of thumb, stop inflating when you no longer see the Flat-Jack rising. In high temperatures, deflate slightly less than normal to prevent internal pressure from increasing.
Avoid sharp objects; consider using a protective mat underneath if needed.
Do not use on steep driveways or excessive slopes.
Never stack on top of other leveling devices.
Use caution when releasing air — the cap is under pressure.
Protect the Flat-Jack from extended UV exposure. If camped in direct sunlight, cover it with a white towel to reduce UV damage.

PDF Manual

Collection: Campsite & Vanlife Gear

Save $20 on Your First Order

Builder & Installer Directory

Search