Lonseal 650 Epoxy Adhesive

$92.50$116.75

Lonseal’s recommended adhesive for vehicle installation on horizontal surfaces such as floor.

We have a blog post on how to install Lonseal flooring with the 650 epoxy adhesive that also mentions some easier-t0-use alternatives.

SKU: N/A Category:
 

Description

  • Lonseal 650 Epoxy Adhesive is formulated for high performance installation of Lonseal flooring on horizontal surfaces such as floors
  • Wet set adhesive
  • Approximately coverage – half-gallon: 85-100 square feet, gallon: 170-225 square feet
  • Open Time (the time between the two-part epoxy being mixed until placing the flooring material into the adhesive) is up to 15 minutes
  • Working Time (the time for the adhesive to accept the flooring material after being applied to the substrate) is up to 15 minutes

Important: this product should not be exposed to freezing temperatures or it can be damaged. Please keep this in mind when ordering to colder climates!

Note: This adhesive must be applied by a trowel with 1/16″ x 1/32″ x 1/32″ U-Notches. Trowel sizes is listed by width/depth/space. All information provided above will vary depending on the job site conditions, including temperature, humidity, substrate porosity, and applicator.

Technical Data Sheet (PDF)
Safety Data Sheet (PDF)

Additional information

Weight N/A
Dimensions N/A
Size

Half Gallon, Gallon