24V Victron Complete Camper Van Electrical System Bundle "Path Finder"

The 24V Victron Electrical System Bundle - “Path Finder” is for vanlifers who want the best of both worlds — the intelligent, networked monitoring of the Trail Blazer Pro with the streamlined simplicity of a two-battery system, all at 24 volts. With 300Ah of lithium power (~7.68kWh), a 3000W inverter, and the full Cerbo GX ecosystem, this is a complete, professionally-spec’d 24V system. Everything talks to everything. You get a 5" touchscreen dashboard, whole-system networking, and enough battery capacity to run your van comfortably for days at a time. If you’ve decided 24V is the right path for your build, this is where you start.

🔧 Wiring, terminals, and fuses included — we’ve already sized and spec’d every component, wire, terminal connector, and fuse to work together for your exact configuration. No spreadsheets, no wasted time, no guesswork — skip the headache.

💰 Pay for what you need, nothing more — wire and terminals are typically sold in bulk, leaving you with an expensive pile of leftovers you’ll never use. Every Path Finder bundle includes exactly what your install requires, plus a few spares for peace of mind.

Features:

• Battery capacity: 300Ah (24V) — ~7.68kWh
• Inverter/Charger: 2400W continuous, 5500W surge
• DC-DC charging: 50A at 12V (700W) from your vehicle’s 12V alternator
• Shore power: 30A (up to ~3,600W)
• Monitoring: Cerbo GX and GX Touch 50 (5" display screen), Bluetooth via VictronConnect app, and VRM access for remote monitoring and troubleshooting (requires internet connectivity)

Beyond the Hardware

• ⚙️ Every component is firmware-updated and pre-configured before it ships — all Victron devices are set up to communicate with each other right out of the box, so you’re not starting from scratch with factory defaults
• 📋 Comprehensive wiring and connector diagram included for install guidance — laminated, large format
• 🛠️ Questions during your install? Vanlife Outfitters’ expert support team has you covered — reach out anytime

Who Is This For?

The “Path Finder” is built for the vanlifer who has chosen 24V and wants a complete, intelligently networked system without the complexity or cost of a secondary alternator build. It’s a great fit if you:

• Have decided on a 24V system and want a complete, turnkey bundle that’s ready to install
• Want whole-system monitoring and networking through a single touchscreen dashboard — battery state, inverter status, DC-DC charger, accessories, and more, all in one place
• Camp regularly and want enough battery capacity to run your van comfortably for days at a time without shore power
• Run power-hungry appliances regularly — induction cooktops, hair tools, power tools — without rationing your battery
• Plan to add solar, tank sensors, or temperature sensors and want a system that’s already built to support them
• Are doing a serious, long-term van build and don’t want to rip out and upgrade components a year from now
• Want the efficiency advantages of 24V — at twice the voltage of 12V, your system draws less current for the same power output, meaning less heat and less energy loss in your wiring while using smaller cables that are easier to work with

What Can It Do?

With 300Ah (~7.68kWh) of lithium power at 24V and a 3000W inverter, the Path Finder handles a full van life setup with confidence:

• 🔋 Run a 12V compressor fridge for days off-grid on a full charge
• 🍳 Cook on an induction cooktop daily without stressing your battery bank
• 💻 Power a full mobile office — laptops, monitors, hard drives, and all your devices simultaneously
• 😴 Run a CPAP, fan, and lights all day or night with plenty of capacity to spare
• 🚗 Recharge while you drive via the Orion XS 1400 DC-DC charger — no solar required
• 📊 Monitor everything from one 5" touchscreen — battery percentage, voltage, inverter load, charger status, and more via the Cerbo GX and GX Touch 50
• 🌡️ Expand your monitoring with optional tank level sensors, temperature sensors, and more — the Cerbo GX is ready for it
• 🔌 Plug into shore power with full surge protection and let the MultiPlus automatically manage the switchover

What it won’t do: power a rooftop air conditioner for extended off-grid stays without solar or driving to replenish — that’s a draw that will tax even 7.68kWh over time. Adding a Sun Seeker solar bundle gives you an additional charging source and the ability to stay off-grid for longer.

How Does It Compare to the 12V Bundles?

The Path Finder isn’t a step up or a step down from the Trail Blazer — it’s a different path for a different builder. In terms of battery capacity, it sits closer to the Weekend Warrior with two batteries, but it brings the Cerbo GX networking and 5" touchscreen dashboard of the Trail Blazer — so you get whole-system monitoring without needing a third battery to justify it. The key differentiator is voltage: at 24V, your system operates at twice the voltage of 12V, meaning half the current for the same power output — less heat, less energy loss, and more efficient wiring throughout. The trade-off is that 24V systems require a DC-DC converter for any 12V loads in your van, and component selection is slightly narrower than 12V. If you’re committed to 24V, the Path Finder gives you everything you need to build it right the first time.

Which Bundle Is Right For Me?

What’s Included

Every Path Finder bundle includes everything you need for a complete system install — down to the wire, terminals, and heat shrink. No second orders, no missing pieces.

Main Components

• 2x SOK Battery 150Ah Lithium Battery (24V) with Victron Communication
  • For reliable power storage, and the heart of your system. 300Ah (~7.68kWh) of lithium power with built-in BMS and Bluetooth for seamless monitoring. Includes brackets for mounting.
• 1x Victron Energy MultiPlus II - 24/3000/70 Inverter/Charger (24V)
  • For converting your 24V battery power to 120V standard outlet power, for charging your battery bank from shore power, and for automatically switching from using battery power to shore power when plugged in.
• 1x Victron Energy Orion XS 1400 - Non-Isolated - 12V/24V DC-DC Charger
  • For charging your 24V battery bank from your vehicle’s 12V alternator while driving.
• 1x Victron Energy Lynx Distributor (M10)
  • A compact positive and negative busbar to connect your chargers and loads to your battery, with 4 slots for fuses.
• 1x Victron Energy Lynx Shunt VE.Can (M10)
  • For monitoring the power coming in and going out of your battery (connects to Cerbo GX), and provides a main system fuse.
• 1x Victron Energy Cerbo GX (MK2)
  • For complete control and monitoring of your system! Monitor your battery and all Victron components, connect tank level sensors, temperature sensors, and more!
• 1x Victron Energy GX Touch 50
  • A 5" touchscreen display for readout from your Cerbo GX.
• 1x Victron Energy Orion 24/12-70 DC-DC Converter
  • For stepping down from your 24V battery bank to 12V to power your standard 12V van loads — lights, fans, water pump, diesel heater controller, and more.
• 2x Victron Energy VE.Bus / VE.CAN Cable (RJ45) - 5.9 ft
  • For connecting your MultiPlus Inverter and Lynx Shunt to the Cerbo GX.
• 1x Victron Energy VE.Direct Cable - 5.9 ft
  • For connecting your Orion XS 1400 DC-DC Charger to the Cerbo GX.
    

Accessory Components

• 1x Blue Sea 6006 Mini Battery Switch
  • For turning on and off main power to your system.
• 1x Blue Sea 9160 ML Link
  • For connecting your battery switch to your Lynx Distributor.
• 1x WFCO WF-8930 Combo 120-Volt AC and 12-Volt DC Load Center
  • A central hub for fusing your 12V DC and 120V AC branch circuits.
• 1x SafeView Smart RV Shore Power Inlet – 30 Amp, Black
  • For charging your battery and running your system on shore power.
• 1x Marinco 25' Shore Power Cord - 30A, 125V
  • For plugging in to a 30 Amp shore power outlet.
• 1x Blue Sea 8077, 30 Amp Shore Power Breaker
  • For protecting your system from overcurrent at faulty campground pedestals.
• 1x Power Watchdog Portable Surge Protector - 30 Amp
  • For protecting your system from surges, spikes, and mis-wired pedestals at campground shore power outlets.

Fuses and Breakers

• 2x Blue Sea 200 Amp MRBF Terminal Fuse
  • For protecting your house battery wiring.
• 2x Blue Sea MRBF Terminal Fuse Block
  • For securing your MRBF fuses to your battery terminals.
• 1x Blue Sea 300 Amp ANL Fuse
  • For the main system fuse in your Lynx Shunt.
• 3x Victron Energy Mega Fuse - 60 Amp
  • For protecting your Orion XS 1400 wiring - 1x at the vehicle starter battery, and 1x in the Lynx Distributor, and your WFCO Load Center wiring at the Lynx Distributor.
• 1x Victron Energy Mega Fuse - 300 Amp
  • For protecting your Multiplus Inverter/Charger wiring at the Lynx Distributor.
• 1x Victron Energy Mega Fuse Holder
  • For connecting your 60A fuse at your vehicle's starter battery. 
• 1x Square D 50 Amp Circuit Breaker
  • The main 120V system circuit breaker for your AC fuse panel.

Wiring, Lugs, Heat Shrink, Ring Terminals, Ferrules

This is the big one — we understand how frustrating it is to buy all of your main system components and then be left to research and separately purchase the dozens of little parts and pieces you need to put it all together. We include everything needed for a complete install, including all wire and terminal connectors, sized to your system’s components. We only source high-quality parts, including Ancor wire and terminals.

What’s Not Included

• Tools — crimpers, wire strippers, a drill, etc.
• Solar - We think DC-DC (alternator charging) and shore power are the best, and most powerful options to start with. Adding solar charging is largely dependent on available rooftop space. Check out our roof top solar bundles here!
• 120V Branch Circuit Breakers and 12V Blade Fuses for your WFCO AC/DC Load Center. A main 30 amp breaker is included, but breakers for your 120V branch circuits are not.

Prefer to build your own bundle instead? Check out our Bundle Builder, which walks you through your entire system step by step. It begins with the basics, like system voltage and battery type, then guides you through each essential component so you can customize your system to fit your needs.

*Please note - this bundle requires additional prep time by our team - the lead time is 3-5 days before it ships out.