Description
Whether you’re trying to keep the van cool during the summer or sealing in the heat in the winter, we’ve got you covered. Designed for stealth camping, these window covers have external facing black fabric for privacy and safety.
This cover uses the strongest magnets available, double-aluminum automotive grade insulation and premium fabrics to create window covers that are durable enough to last through all your adventures.
What’s Included:
[1] Crew Door Window Cover
[1] Storage sack
[1] Installation Kit
What is the R-Value of these window covers?
R-value is a building insulation spec based on 6 inches of insulation. Without 6 inches of insulation, an R-value will be inaccurate. The window covers are made with 5 mm automotive-grade PE foam insulation. If you install the covers on all windows and leave them in all day, the inside of the van will be approximately 20 degrees F cooler than the outside temperature (assuming the rest of the van is properly insulated and the cabin is separated from the cockpit).
BARE METAL (Cargo Vans): This cover will attach to the bare metal around the window. Standard factory glass, after market CRL, AMA, VanWindows Direct or other glass is all compatible with this window cover. *Will not work if window has been “framed” in with fabric, wood, plastic, etc.*
PASSENGER VANS: With the factory plastic trim or emergency window remaining in place, our magnet strength should grab through the plastic trim but in addition on our regular crew window (MERC007, VE3017), we have stitched in along the top of each cover velcro that can be used to additionally adhere the window cover in place along the top. We include VHB velcro in each window cover. Please clean the plastic before adhering the VHB to the top of the window frame.
DIRECT FIT: The window cover is sized to fit the metal frame of the window itself. Metal tabs/3M adhesive kit are included to attach to the window frame and line up with where the magnets are located inside the window cover. *Only compatible with the stated direct fit window model*
ADVENTURE WAGON: For people with framing covering the window pocket are now supported with a smaller crew window cover. This grabs on to the small bare metal flat section around the glass and should accomodate all aftermarket windows installed in that section. For best installation with ADV Kits, you will need to tuck it in about 1/4 inch to get the best light blocking seal. Alternatively you can buy the larger cover and put magnets (sold separately) behind the wall panel and the magnets will grab through there.
STORYTELLER VANS: This is new to our collection as so many have asked for an upgrade to this location. Our cover folds up in place and can open one side to the other and come in both colors.
