Scroll Down For More Information
 

Nomadic Cooling – X2 – DIY Install Kit

$299.00

If you are a DIY enthusiast planning to install the X2 Air Conditioner, then the X2 DIY Install Kit is the perfect option for you. This kit contains all the essentials and more you need to ensure a quick and effortless installation and setup process. With everything you need in one place, you can spend less time figuring out what to buy and more time enjoying the comfort of your air conditioner during long trips.

There are three versions of the kit: 12-volt, 24-volt and 48-volt. The 12-volt kits include 4 AWG wire with a 70 amp fuse, the 24-volt kit includes 8 AWG wire with a 50 amp fuse and the 48-volt kit comes with 10 AWG wire and a 30 amp fuse. Please scroll down to the description below for details.

Note: wire gauge included in the kit is based on a relatively short wire run installed into a small vehicle like a van. Please use an ampacity calculator such as the “Blue Sea Circuit Wizard” when sizing your wire for your particular situation.

In stock and ready to ship within 24-48 hours.

$10 flat-rate shipping to the continental USA!

Add to wishlist
SKU: Nomadic X2 DIY Kit Category:
buy with confidence, secure checkout, world-class support, free shipping
 

Description

Nomadic Cooling’s “DIY Installation Kit” Includes

12-Volt X2 Nomadic Cooling DIY Installation Kit Includes:

  • Power Bundle (4AWG) with Anderson Style Connector
  • Pre-installed Fuse Holder and 70A Fuse on Bundle
  • Pre-installed Stainless Steel Terminals on Bundle
  • Trim Ring (Optional for install)
  • 14″ x 14″ Cardboard Cutout Template
  • Zip Ties with Sticky (Mounting) Plates
  • Polyurethane Adhesive Sealer with Application Nozzle
  • Wide Thermo Tape (5 ft.)
  • Heat Shrink Wraps 3/4″ (3 Red and 1 Black)
  • Tube of Threadlocker

24-Volt X2 Nomadic Cooling DIY Installation Kit Includes:

  • Power Bundle (8AWG) with Anderson Style Connector
  • Pre-installed Fuse Holder and 50A Fuse on Bundle
  • Pre-installed Stainless Steel Terminals on Bundle
  • Trim Ring (Optional for install)
  • 14″ x 14″ Cardboard Cutout Template
  • Zip Ties with Sticky (Mounting) Plates
  • Polyurethane Adhesive Sealer with Application Nozzle
  • Wide Thermo Tape (5 ft.)
  • Heat Shrink Wraps 3/4″ (3 Red and 1 Black)
  • Tube of Threadlocker

48-Volt X2 Nomadic Cooling DIY Installation Kit Includes:

  • Power Bundle (10AWG) with Anderson Style Connector
  • Pre-installed Fuse Holder and 30A Fuse on Bundle
  • Pre-installed Stainless Steel Terminals on Bundle
  • Trim Ring (Optional for install)
  • 14″ x 14″ Cardboard Cutout Template
  • Zip Ties with Sticky (Mounting) Plates
  • Polyurethane Adhesive Sealer with Application Nozzle
  • Wide Thermo Tape (5 ft.)
  • Heat Shrink Wraps 3/4″ (3 Red and 1 Black)
  • Tube of Threadlocker

Additional information

Weight 250 oz
Dimensions 20 × 20 × 20 in
AC Unit Voltage

12-Volt, 24-Volt, 48-Volt

Related Products