What kind of solar/electrical system do you need in your camper van? Some tips below!

Step 1: Figure out your needs with a load calculation. We have a detailed blog post including sample load calculations you can use for this step. This exercise will really help you with the next two steps!

Step 2: Make a foundational decision on the type of system you'll be building. We've narrowed this down to three basic approaches/architectures - all of which use lithium-type batteries, and each one has a detailed blog post, free example wiring diagram, and, for the Victron-based systems, a discounted Victron Energy product bundle that you can configure to your specific needs. You'll save a bundle with our bundles! You can think of this as the primary components and the products in the bundle are specific to the architecture/system design you've chosen.

Step 3: Add on the "accessories" that you need for your particular system with our discounted accessories bundle that includes everything from shore power inlets to circuit protection and wiring, and our solar components bundle that includes everything from mounting brackets to solar extension cables and charge controllers. These are the products that will tie everything together into a fully functional power system but are not specific to a particular example wiring diagram/architecture.

Example: in this blog post, where we compare a "traditional" Victron-based system to an EcoFlow Power Kit, we have some video screen captures from our store product pages showing how we configured our internal BMS bundle and our accessory bundle to get a close comparison. These screen capture videos are helpful to see how versatile our bundles are and how you might configure them.