Overview

• Compatible with most vehicles/vans – see dimensional drawings.
  • All showers are 24″ deep and 74.5″ high. Widths are 24″, 30″, 33″, or 36″.
• Ventilation holes above door,
• Holes for assembly are pre-drilled for rivets provided,
• We recommend adding a shower mat (wooden or other),
• The shower door is 20.8” wide when opening into the living space.

Installation & Use

• PDF installation instructions
• Plumbing components, fixtures, drain, and curtain are not included.
• After identifying a location for the shower pan drain, install the rear panel behind the pan and attach side panels using rivets.
• Attach the front door panel using rivets or bolts.
• Insert the ceiling panel last (any electrical for lighting can be done prior to this step) and rivet or bolt in place.
• We recommend fastening to the van using the floor drain and fasteners of your choice through the top of the shower into the van’s framing members.
• Additional rivet holes can be drilled if needed but are not required.
• Shower seams should be sealed after installation with silicone or similar.
• The shower pan is not sloped since the placement of the drain is determined by the installer and each vehicle/installation will have it’s own, unique conditions/angles.
• Door panels can be customized – see example photos!
• If you wish to add a shower curtain, this must be purchased separately and can be paired standard, tension rod.
• We suggest using mild cleaning products that are non-abrasive.

Dimensional Drawings